alloying element

Thus, the role of alloying element depends mainly on its impact on the state diagram.

因此, 合金元素的作用主要取决于其对状态图的影响.

Influence of Trace Element Alloying and Thermomechanical Treatment on Elastic Modulus of Cu Based Alloy

合金化与形变热处理对铜合金弹性模量的影响

An alloying element that is used in stainless steel to deter corrosion.

不锈钢中的一种合金元素,具有抗腐蚀特性.

An alloying element that enhances corrosion resistance along with chromium in stainless steels.

不锈钢中的一种合金元素与铬元素一样提高不锈钢抗腐蚀性能.

Sc is the most effective alloying element in aluminum alloy.

钪是到目前为止所发现的对铝合金最为有效的合金化元素.

The change in strength of cryogenic austenitic steel with temperature and alloying element content was studied.

研究了低温奥氏体钢的强度随温度及合金元素含量的变化规律.

RE are important alloying element to magnesium alloys.

稀土是镁合金的重要合金元素.

Influence of alloying element titanium on formation of D-type graphite

合金元素Ti对D型石墨形成条件的影响

Effect of alloying element on mechanical properties of fe_3al and FeAl alloys

合金元素对Fe3Al和FeAl合金力学性能的影响

Trial and Analysis on composition control of alloyed tool steel and die steel and alloying element loss in refining by medium frequency induction furnace

中频感应炉冶炼合金工模具钢的成分控制和合金元素烧损探析

In regard to non wear resistance of the white iron shot in the practical application process, alloy iron shot have been produced by means of adding alloying element and proper heat treatment.

针对白口铁丸在实际应用过程中不耐磨易破碎的现象，在白口铸铁中通过添加合金元素及适当热处理等手段生产合金铁丸。

The effect of alloying element Nb on age hardening curves of Ni base alloy used to make gas turbines has been investigated.

研究了Nb对燃气轮机用镍基合金时效硬化曲线的影响。

Influence of iron as alloying element on crevice corrosion behavior of titanium

合金元素铁对钛缝隙腐蚀性能的影响

Iron ingot with the same chemical compositions as water atomized iron powder was utilized for specimens coated with alloying element powder layer to investigate the plasticity improving mechanism of partially alloyed iron powders.

采用与水雾化铁粉纯度相同的致密铁铸锭作试样，通过在其表面涂覆合金元素粉末层进行部分预合金化扩散处理，以研究部分预合金化铁粉的压缩性改善的机理。

Plain carbon steel . A ferrous alloy in which carbon is the prime alloying element.

碳为主要合金元素的铁基合金.

An alloying element used in stainless steels to enhance ductility and corrosion resistance.

不锈钢中的一种元素,提高不锈钢延展性和抗腐蚀能力.

Using Mn as an alloying element and meanwhile adding Sn element to be able to carry out liguid-phase sintering, the Fe-Mn-Sn alloys have been formed.

采用Mn作为合金元素，同时添加可进行液相烧结的元素Sn，形成Fe-Mn-Sn系合金。

According to the composition of 6061 aluminum alloy, the Al, Mg, Si and Cu element powders were mechanical alloyed. Physics phases, alloying character, lattice constant, grain size and lattice strain of these powders were determined and discussed.

Al，Mg，Si和Cu元素粉末按6061铝合金成分配比进行了机械合金化（MA），对其物相、合金化特性、晶格常数、晶粒尺寸及点阵应变作了测定和分析讨论。

It is shown that the microstructures, alloying element distribution and magnetic conductivity of P tude remarkably differ from those of S tube.

结果表明，两种渗碳管的组织、合金元素分布及导磁性存在着显著差别。

The charging and discharging result indicated that when the alloying element are many ( M: V ≥ 0.25:1.75), the material charging and discharging platform reduces, this causes the material the platform to be stable, which is advantageous in using for the battery charging and discharging.

充放电结果表明，当掺杂元素多时（M：V≥0.25：1.75），材料的充放电平台减少，这就使得材料的平台更加稳定，有利于用电池充放电，改善充放电效率。